 |
 |
 |
ds 3000 overview
 Download DS3000 spec sheet in pdf format
Key Features
> Powerful motor
> Electric System:
180VDC 1.5kW through 70:1 Gearbox -
Delivering 600Nm of Torque -
180VDC 2.2 kW through 70:1 Gearbox -
Delivering 840Nm of Torque
> Hydraulic System:
BR50 Drive for 40L/min @175bar -
Delivering 2.3kNm of Torque -
BR80 Drive for 65L/min @175bar -
Delivering 4.4kNm of Torque
> Variable speed controller
> 0- 35m/minute
> Active Electric brake
> Hydraulic gearbox brake
> Auto Cable spooling
> Two Optical Depth Encoders
> Two Rate Metres
> Load cell fitted with Programmable
Auto Cut-off
> Remote control
> High Quality finish
Construction
The DS-3000 is a winch designed for maximum borehole depths of
3000m utilising 3/16” cable, or 7000m utilising 1/8” cable. It is designed
with a small footprint made in a strong steel box construction capable
of handling the toughest conditions and one that will last for many years.
The drum is cast aluminium in construction to provide strength whilst
reducing weight. A powder coated finish protects the winch from the
elements and looks fantastic on any logging project.
Cable Spooling
The DS-3000 incorporates an accurate cable laying system using a very
effective helical cable guide to automatically lay the cable uniformly and
precisely on the drum. Although it is unlikely to be required, a convenient
and simple-to-use manual adjuster is provided. The life of the helical shaft
is increased through the provision of dust gaiters that provide protection
from dust and dirt.
Slip Rings
Only the best slip rings are used on the DS3000. They provide reliable,
uninterrupted communication between downhole instruments and
surface acquisition systems. The durable, compact, maintenance free
ball bearing construction together with high rev per minute capacity, low
(electrical) noise and low resistance, make the Mercotac slip ring ideal for
the DS3000 application.
Electric Motor & Controller
The winch is powered by an extremely reliable Baldor DC permanent
magnetic electric motor. It is an enclosed fan cooled motor with 20:1
speed range and positive torque. It has short circuit, transient and
overload protection and a rugged IP65 control enclosure. A 240V
variable speed controller ensures smooth control from 1m per minute
up to a maximum mid drum speed of 40m per minute.
Hydraulic Motor & Proportional Valve
BR50 with 40L/min delivery
BR80 with 60L/min delivery
The proportional valve select
ed for the DS3000 is the PVG 32 Sauer
Danfoss a hydraulic load sensing valve designed to give maximum
flexibility from a simple load sensing directional valve.
Depth & Rate Measuring
Depth and Rate (m/min) are measured by two optical depth encoders
and displayed on a programmable LCD monitor. The system is factory
calibrated, providing accurate depth and rate measurements. The
measuring wheel is machine-grooved and provides continuous cable
contact using a spring-loaded pressure wheel combination that tracks
along the helicon shaft.
Brake
Electric Winch has two independent operating brakes both controlled
via a switch on the control box. A 240V pump deactivates a hydraulic
brake in the gearbox mounted inside the winch drum. A second brake
is mounted on the electric motor shaft and is actuated when neutral is
selected on the “up/down” switch.
Hydraulic Winch has the same brake as the electric winch mounted
inside the gearbox. This brake is automatically actuated with the joystick
as the operator brings the winch to a stop.
Warranty
Every winch is covered by a 5 year warranty on the frame and one year
on all other components.
Technical Specifications
Drum Capacity Meters Cable Weight
1/10” Slick line 10000m
1/8 “ 7000m 40kg/km 280kg
3/16” 3000m 94kg/km 282kg
1/4” 1500m 159kg/km 239kg
Dimensions
Electric L = 132cm, W= 90cm, H=77cm
Hydraulic L = 132cm, W= 100cm ,H= 77cm
Weight
Electric 380Kg
Hydraulic 340Kg
Payload Lifting Capacity
Electric 320Kg
Hydraulic 1500Kg
Example
www.globedrill.com.au
www.stockholmprecisiontools.com
|
| |
|
|
|
|
